Modeling of light dynamic cone penetration test – Panda 3 ® in granular material by using 3D Discrete element method

Abstract : The recent technological developments made on the light dynamic penetration test Panda 3 R provide a dynamic load–penetration curve σ p − s p for each impact. This curve is influenced by the mechanical and physical properties of the investigated granular media. In order to analyze and exploit the load-penetration curve, a numerical model of penetration test using 3D Discrete Element Method is proposed for reproducing tests in dynamic conditions in granular media. All parameters of impact used in this model have at first been calibrated by respecting mechanical and geometrical properties of the hammer and the rod. There is a good agreement between experimental results and the ones obtained from simulations in 2D or 3D. After creating a sample, we will simulate the Panda 3 R. It is possible to measure directly the dynamic load–penetration curve occurring at the tip for each impact. Using the force and acceleration measured in the top part of the rod, it is possible to separate the incident and reflected waves and then calculate the tip's load-penetration curve. The load–penetration curve obtained is qualitatively similar with that obtained by experimental tests. In addition, the frequency analysis of the measured signals present also a good compliance with that measured in reality when the tip resistance is qualitatively similar.
Type de document :
Communication dans un congrès
Powders and Grains 2017 – 8th International Conference on Micromechanics on Granular Media, 2017, Montpellier, France. 140, 2017, 〈10.1051/epjconf/201714016003〉
Liste complète des métadonnées

Littérature citée [6 références]  Voir  Masquer  Télécharger

https://hal-clermont-univ.archives-ouvertes.fr/hal-01658303
Contributeur : Bastien Chevalier <>
Soumis le : jeudi 7 décembre 2017 - 15:23:22
Dernière modification le : jeudi 11 janvier 2018 - 06:28:14

Fichier

epjconf162050.pdf
Fichiers éditeurs autorisés sur une archive ouverte

Identifiants

Citation

Quoc Anh Tran, Bastien Chevalier, Miguel Benz, Pierre Breul, Roland Gourves. Modeling of light dynamic cone penetration test – Panda 3 ® in granular material by using 3D Discrete element method. Powders and Grains 2017 – 8th International Conference on Micromechanics on Granular Media, 2017, Montpellier, France. 140, 2017, 〈10.1051/epjconf/201714016003〉. 〈hal-01658303〉

Partager

Métriques

Consultations de la notice

83

Téléchargements de fichiers

36